Design your glass wine room
Try the layout, size, frame, door and glass, and see it in 3D as you go. It’s a starting point for a conversation with our team, not an order: when you like it, send it over and we’ll call to talk it through, set up a free measure and turn it into a real quote.
Drag to turn · pinch or scroll to zoom
Step 1
Where does the glass go?
Choose how many sides of the room are glass. The rest are solid walls your builder frames.
Step 2
How big is the room?
Start with the closest size. If you know your numbers, fine-tune them below. We measure exactly before anything is ordered.
Step 3
Frame and finish
Frame
Finish
Paint color
The standard storefront paint colors we order most. Colors on screen are close, not exact.
We’ll show the frame in black for now, and the drawings will say the color is to be selected.
We can match almost any color, from a paint chip, a sample or a paint brand’s color code. Not sure yet? Pick “Decide later.”
Bars across the glass
Glass taller than 10 ft 5 in needs a bar across it, so “Clean” is off at this ceiling height.
Bars across the glass need the full frame, so they’re off for semi-frameless.
Step 4
The door
Door type
Hinges for the glass door
Where on the front
Hinges on the
Swing
Under the stairs, the door goes at the tall end so you can walk in upright.
Above the door
Door height
Pull
Hardware finish
Step 5
The glass
Glass color
Coating
Safety glass
Decorative touch
Every etched design is made to order. We can make a band taller, thinner, higher or lower, change the spacing of stripes or dots, match a design you’ve seen, or etch your own logo or artwork. These are starting points.
On the glass
On the door
Step 6
Finishing touches
These only change the picture, so you can see how the room will feel. Glass is our specialty, and we can coordinate the racking and lighting around it.
Racking
Lighting
Step 7